DS560MB410: Does DS560MB410 have any AMI or Spice model for simulation? And does it support M-phy?

Hi,

1) We do not have an IBIS-AMI model currently available, but we do have S parameters of the CTLE curves of this device.  These can be found on mysecure.  If you don't have access, you can request access with the link below.

https://www.ti.com/licreg/docs/swlicexportcontrol.tsp?form_id=268257&prod_no=DS560MB410-DESIGN&ref_url=asc_hsdc_hsdc-hssc

2) Can you share any information on the M-phy electrical specification?  In general, it sounds like 39.936 Gbps PAM4 is within the capabilities of the DS560MB410, but it would be helpful to reference the M-phy electrical specification to confirm.

Thanks,

Drew

Hi Drew:

Thanks for your reply.

You can access the M-phy 5.0 spec with the link below

MIPI M-PHY | MIPI

And the current published version is 25G NRZ. The M-phy 6.0 for 39.936G PAM4 is still under investigating.

Hi,

Thanks for sharing.  I will look into this further and get back to you this week.

Thanks,

Drew