• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 2 answers
  • Subscribers 33 subscribers
  • Views 120 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM26LV32E-EP: AM26LV32E-EP

Balaram kumar
Prodigy 40 points
Part Number: AM26LV32E-EP

What is the output voltage level when Vcc = 3.3V and Vinputs are in the range +5V. Whether the output will follow Vcc supply voltage or Vinputs.

  • 0
    Guru 262920 points

    The purpose of a differential receiver like this is to convert any input signal inside the valid common-mode range (±7 V) into a proper logic signal at the output. As shown by the VOL/VOH specifications, the output voltage is determined by VCC.

  • 0
    TI__Mastermind 45847 points

    Hi Balaram,

    Outputs are bounded by VCC and GND - Clemens analysis is correct.  Essentially the differential receiver will convert the differential voltage to a logic level bounded by VOL/VOH (if the load is high impedance - and you are only drawing 100uA or less then VOL = 0.1V (max) and VOH = VCC - 0.1 (max) - more current output will attenuate the output voltage).

    Please let me know if you have any other questions!

    Best,

    Parker Dodson