• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 81 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS110DF410: Mode

Ivy Jin
Intellectual 2660 points
Part Number: DS110DF410

Hi team,

My customer uses DS110DF410 between fiber interface and FPGA. They would like to know which mode(0/1/2/3) is normally used in this case.

Could you please help give some suggestions? Thanks in advance!

Regards,

Ivy

  • 0
    TI__Genius 13582 points

    Hi Ivy,

    Although this is application dependent, I have seen Adapt Mode 1 yield good performance for DS110DF410 with fiber interface in the past.

    If the customer is able, we recommend testing with Adapt Modes 2 and 3 as well to see if there is any notable difference in BER.

    Thank you,

    Evan