DS110DF111 register settings 2.125Gbps

user6207997

Other Parts Discussed in Thread: DS110DF111

I want to use DS110 at 2.125Gbps
Please tell me the register setting.

0 Evan Mayhew 8 months ago

Hi,

Here are the required channel register writes for this rate.

0x2F = 0x16 (set group 0 to div4 subrate)

0x61 = 0xAD

0x62 = 0x00 (set group 0 rate to 9/4 = 2.25Gbps)

If you are using SigCon architect to configure the device, here is the equivalent high-level device config:

Thank you,

Evan

0 user6207997 8 months ago in reply to Evan Mayhew

Dear Evan

Thank you for your answer.

But,I want to operate DS110DF111 with 2.125Gbps instead of 2.25Gbps.

(set group 0 rate to 8.5/4 = 2.125Gbps)

Please tell me the register setting.

0 Evan Mayhew 8 months ago in reply to user6207997

Hi,

My mistake, thank you for the correction.

The setting for 2.125Gbps is:

0x2F = 0x16
0x60 = 0x80
0x61 = 0xAA
0x64 = 0xF0
0x67 = 0x00

Regards,

Evan

0 user6207997 8 months ago in reply to Evan Mayhew

Dear Evan

Thanks for the corrected answer.

I was able to confirm that DS110DF111 operates at 2.125Gbps with the settings you told me.

Regards,

Interface forum