Hi Team,
Please tell me the procedure for using each loopback function.
Can the user get started by simply doing the following?
If no, please tell me correct procedure.
MII Loopback:
Set register address 0x0000[14]=1b
Near-end Loopback:
Set register address 0x0016[4:0]
00001 = PCS Input Loopback
00010 = PCS Output Loopback
00100 = Digital Loopback
Far-end Loopback:
Set register address 0x0000[14]=1b
Reverse Loopback:
Set register address 0x0016[4:0]=10000b
Best Regards,