This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team
We use Linux platform to develop our product, and has a TMDS171 on our board for HDMI.
I have the following questions that need your help:
1. Does TMDS171 has a Linux driver to control the power-on sequence?
2. In practical application, does the power-on sequence can completed automatically by hardware?
3. In practical application, do we need to change to configuration of TMDS171 or use the default configuration when system power on ?
Thank your!
Snow
Best regards
Snow
Please see my inserted response below,
1. Does TMDS171 has a Linux driver to control the power-on sequence?
*** No
2. In practical application, does the power-on sequence can completed automatically by hardware?
*** Yes, please see section 8.3.1 Reset Implementation and 8.3.2 Operation Timing for detailed implementation information.
3. In practical application, do we need to change to configuration of TMDS171 or use the default configuration when system power on ?
*** TMDS171 can be configured either in pin-strap mode or I2C mode. Please see this app note, https://www.ti.com/lit/an/slla466/slla466.pdf, for TMDS171 configuration information.
Thanks
David