• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 85 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS110DF410: Power down mode

Einav Atiya
Prodigy 70 points
Part Number: DS110DF410

Hello,

What is the Power Supply Consumption When no signal is present at the input of the DS110DF410 (the signal detect circuitry will
power down all the channels)?

Thank you,

Einav

  • 0
    TI__Mastermind 20192 points

    Hi Einav,

    I'll look into this, I didn't find this measurement readily documented.  I expect to have feedback within a couple days.

    Thanks,

    Drew

  • 0 in reply to Drew Miller1
    TI__Mastermind 20192 points

    Hi Einav,

    Unfortunately, our DS110DF410 EVM does not have a way to separate DUT current draw from some of the other supporting circuitry, like the 25 MHz oscillator.  With that said, I observed 55 mA load on our 2.5V rail on our EVM with no signal connected to the DS110DF410.  Please use this as an indicator for idle power supply consumption.

    Thanks,

    Drew