DS110DF410: Power down mode

Einav Atiya

Part Number: DS110DF410

Hello,

What is the Power Supply Consumption When no signal is present at the input of the DS110DF410 (the signal detect circuitry will
power down all the channels)?

Thank you,

Einav

4 months ago

0 Drew Miller1 4 months ago

TI__Mastermind 20192 points

Hi Einav,

I'll look into this, I didn't find this measurement readily documented. I expect to have feedback within a couple days.

Thanks,

Drew

0 Drew Miller1 4 months ago in reply to Drew Miller1

TI__Mastermind 20192 points

Hi Einav,

Unfortunately, our DS110DF410 EVM does not have a way to separate DUT current draw from some of the other supporting circuitry, like the 25 MHz oscillator. With that said, I observed 55 mA load on our 2.5V rail on our EVM with no signal connected to the DS110DF410. Please use this as an indicator for idle power supply consumption.

Thanks,

Drew

Interface

Interface forum

DS110DF410: Power down mode