DS90UB953-Q1: DS90UB953-Q1

Pranjali Andhare

Part Number: DS90UB953-Q1
Other Parts Discussed in Thread: DS90UB964-Q1, DS90UB936-Q1, DS90UB962-Q1, DS90UB954-Q1, DS90UB960-Q1, DS90UB934-Q1, DS90UB914A-Q1, DS90UB9702-Q1

As per datasheet DS90UB953-Q1 is compatible with DS90UB954-Q1, DS90UB964-Q1, DS90UB962-Q1, DS90UB936-Q1,DS90UB960-Q1, DS90UB934-Q1, and
DS90UB914A-Q1 deserializers. I want to ask can we use DS90UB9702-Q1 deserializer with 3XDS90UB953-Q1 serializer

1 month ago

0 Hamzeh Jaradat 1 month ago

TI__Guru* 87750 points

Hello,

yes, this is okay.

0 Pranjali Andhare 1 month ago in reply to Hamzeh Jaradat

Prodigy 250 points

Thanks for your reply

0 Pranjali Andhare 1 month ago in reply to Hamzeh Jaradat

Prodigy 250 points

Thanks for your quick reply. As per your confirmation we are going with DS90UB9702-Q1 for our DS90UB953-Q1 serializers. As per datasheet " When using the FPD-Link IV CDR to pair with an FPD-Link III CSI-2 serializer, the deserializer can only be programmed to run in half-rate mode '. Can you please tell me how this configuration need to select?

0 Hamzeh Jaradat 1 month ago in reply to Pranjali Andhare

TI__Guru* 87750 points

Hello Pranjali,

As you know, this is a public forum and any details regarding the UB9702 is confidential and can be shared only under a valid NDA. Hence, please reach out to your local TI representative, they should be able to help you further.

0 Pranjali Andhare 1 month ago in reply to Hamzeh Jaradat

Prodigy 250 points

Ok I will check with local TI representative

Interface

Interface forum

DS90UB953-Q1: DS90UB953-Q1