DP83TC811-Q1: DP83TC811 Wake on LAN

Kung Poyuan

Part Number: DP83TC811-Q1
Other Parts Discussed in Thread: DP83TC811

Tool/software:

The system needs to implement the Wake on LAN function. Currently, the RMII_REFCLK 50MHz is generated by the system, but the RMII_REFCLK is turned off when the system enters sleep mode.

Is there a way to configure the registers to enable the DP83TC811 Wake on LAN function without the 50MHz clock?

Or is the 50MHz clock necessary for the Wake on LAN function?

1 month ago

0 Avtar Dhaliwal 1 month ago

TI__Expert 4010 points

Hello Kung,

Is the PHY currently in RMII slave mode? If so then yes the 50MHz clock is necessary for the Wake on LAN function as well as general PHY function.

To clarify however, is the question if the PHY can function properly without the 50MHz reference clock?

Regards,
Avtar

0 Kung Poyuan 1 month ago in reply to Avtar Dhaliwal

Prodigy 30 points

The PHY is currently in RMII slave mode, so I need to add an external oscillator to provide 50 MHz ?

0 Avtar Dhaliwal 1 month ago in reply to Kung Poyuan

TI__Expert 4010 points

Hello Kung,

Yes, below goes more in detail on the typical application for RMII slave for the DP83TC811.

Regards,
Avtar

Interface

Interface forum

DP83TC811-Q1: DP83TC811 Wake on LAN