Please let me know about external parts of XIO2001EVM.
①L3:Inductor or Filter
・XIO2001EVM user's manual written in L3:"200Ohm 200mA"(page 21: schematic), but BOM list is 10μH inductor.
Which is correct? (Is BOM list typo?)
・If filter is correct, is L3 use BLM21(same as L1 & L2) no problem?
②EEPROM
・Is there information of EEPROM data format or writing method?
・XIO2001EVM is connecting 24LC08BIST(I2C 8Kbit) EEPROM.
Is EEPROM change 4kbit device no problem?
・If the case of unused EEPROM, I will connect GPIO4/SCL to pulldown.
Is there any other careful point?
Best regards,
Satoshi