TPD1E05U06-Q1: TPD1E05U06-Q1 Issues

Mitch M

Mastermind 19355 points

Part Number: TPD1E05U06-Q1

Hello,

We are having a problem with the TPD1E05U06-Q1. The device is on a line that has 1.6V and is in breakdown holding the line at 900mV. we did not expect breakdown until 6.5V via the datasheet. Do you know what could cause this?

over 6 years ago

0 Alec Forbes over 6 years ago

TI__Expert 3500 points

Mitch-

Can you try to measure the voltage drop in the other direction over the device? The device is unidirectional, so one orientation will have a forward voltage of around .7-1V while the other will have the 6.5V you will expect. If that isn't the issue, let me know and I'll dig more into it. We haven't heard any issues with the device clamping lower than expected, so I would be curious to see what happened.

Thanks,

Alec

0 Mitch M over 6 years ago in reply to Alec Forbes

TI__Mastermind 19355 points

Alec,

That's what we thought at first too, so we swapped the device around and it actually got worse.... So we are fairly confident that the device's were in the correct direction.

0 Alec Forbes over 6 years ago in reply to Mitch M

TI__Expert 3500 points

Mitch-

I've taken this to email.

Thanks,
Alec

Interface

Interface forum

TPD1E05U06-Q1: TPD1E05U06-Q1 Issues