FPC401: Does the enable pin (EN) cause I2C registers to be reset and downstream I2C communications to be interrupted?

Casey Morrison

Intellectual 1985 points

Part Number: FPC401

Posted on behalf of another E2E user.

If the EN pin is set from high (1) to low (0), will FPC401’s internal registers be reset or not? Also will the I2C communication (if on-going) between optical modules and FPC401 be interrupted or not?

over 6 years ago

0 Casey Morrison over 6 years ago

TI__Intellectual 1985 points

Setting EN=0 does in fact reset the FPC401 internal registers. All I2C communications, host-side and port-side, will be interrupted as well until EN=1.

0 Michael Lu (Santa Clara) over 6 years ago in reply to Casey Morrison

TI__Mastermind 29635 points

This thread is considered answered and closed.

Interface

Interface forum

FPC401: Does the enable pin (EN) cause I2C registers to be reset and downstream I2C communications to be interrupted?