Other Parts Discussed in Thread: SN65LVDT100
Hello,
When restarting the TFP410, how much required time from power OFF to power ON ?
My customers are considering operations at less than 1 ms.
Best Regards,
sopatopa
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
When restarting the TFP410, how much required time from power OFF to power ON ?
My customers are considering operations at less than 1 ms.
Best Regards,
sopatopa
Hello,Joel
Thanks for your reply.
I will explain this information to customers.
Best Regards,
sopatopa
Hello,Joel
Thanks for your reply.
I will explain this information to customers.
However, I received the following reply on other products.
> SN65LVDT100: Restart time (Power OFF -> Power ON) and Power restart Voltage (required falling voltage)
there is not a specific requirement of how low the voltage needs to be.
However, please notice that the device output will be undetermined during that period.
https://e2e.ti.com/support/interface/high_speed_interface/f/138/t/665592
Best Regards,
sopatopa