TUSB1210-Q1: TUSB1210 Timing issue with Zynq-7000, solved or not?

Francesco Ricci

Part Number: TUSB1210-Q1
Other Parts Discussed in Thread: TUSB1210,

Hello,

I saw on this thread (https://e2e.ti.com/support/interface/usb/f/1008/t/522352) that the TUSB1210 timing issue with Zynq-7000 was solved.

I need to use the automotive grade version (TUSB1210-Q1). Its datasheet does not contain the new delay specification required to be compatible with the Zynq-7000.

Are the new timing specification simply missing from the TUSB1210-Q1?

Are the timings different between TUSB1210-Q1 and TUSB1210?

Thank you

Francesco

over 6 years ago

0 Michael.Walker over 6 years ago

TI__Mastermind 19720 points

I am checking on this and will get back to you.

0 Michael.Walker over 6 years ago

TI__Mastermind 19720 points

The timing for the TUSB1210-Q1 and the TUSB1210 should be the same, so the TUSB1210-Q1 can work with the Zynq-7000.

0 Francesco Ricci over 6 years ago in reply to Michael.Walker

Intellectual 350 points

Thank you for the quick answer. My only concern is the "should". Can you confirm that the timings are identical between the two parts?

0 Michael.Walker over 6 years ago in reply to Francesco Ricci

TI__Mastermind 19720 points

Sorry for the wording, Yes the two parts have the same timing.

0 Francesco Ricci over 6 years ago in reply to Michael.Walker

Intellectual 350 points

Thank you!

Interface

Interface forum

TUSB1210-Q1: TUSB1210 Timing issue with Zynq-7000, solved or not?