DP83848YB: What is the "weak pullup" resistance value used on the strapping pins

Michael T Schneider

Part Number: DP83848YB

Hello,

My customer is wondering What is the "weak pullup" resistance value used on the strapping pins for the device. I do not see it mention a value in the datasheet section 4.9 and I was wondering if we have that information.

Thanks

Michael Schneider

AFA - Los Angeles

over 7 years ago

0 Aniruddha Khadye over 7 years ago

TI__Mastermind 18425 points

Hello Micheal,

The internal weak pull up is in the range of tens of kohm, around 25kohm. This is not meant to be a exact value but its supposed to provide a default mode when no straps resistors are used.

-Regards,
Aniruddha

0 Michael T Schneider over 7 years ago in reply to Aniruddha Khadye

TI__Expert 3790 points

Thanks Aniruddha! assuming that the pulldowns also ~25kohm? Sorry I should have been more broad in my previous post.

Interface

Interface forum

DP83848YB: What is the "weak pullup" resistance value used on the strapping pins