• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 364 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65HVD1471: Hardware interface with microcontroller

sabitha m
Prodigy 40 points
Part Number: SN65HVD1471

Dear sir,

i bought SN65HVD1471, for communicating PIC18F65K40 using RS422 protocol. I can't able to understand, how it's interfacing with DB9 connector and also where to drive output and to give input in this transceiver IC.

Regards,

Sabitha

  • 0
    TI__Intellectual 2090 points
    Hi Sabitha,

    The SN65HVD1471 transceiver takes a D input from an MCU to drive a differential signal onto the Y/Z bus. The R pin is an output to an MCU from the differential signal on the A/B bus. The RE and DE pins are inputs from the MCU to enable and disable the driver and receiver.

    Could you send a diagram of your application including the DB9 connector with pins labeled? I'd like to understand your question with more clarity.

    Best Regards,
    Max Megee