[ TUSB212-Q1 ] General Questions
Hi,
Can you help to clarify a couple of questions from my customer with regards to TUSB212-Q1?
<Q1>:
Could you please let me know how TUSB21x series operate?
As my understanding, the device attempts to detect its signal rising/falling edge of HS, then try to inject current to "boost" rising / falling edge.
It's appreciated if you have a document which describes operational basics.
<Q2>:
If my understanding above is right, the changing EQ setting change injected current.
Do you have injected current values for each EQ setting?
<Q3>:
Do you have the eye diagram with different EQ and DC setting for the condition below?
Upstream SQ Test
- Host
- Near End Mask
- Several different cables (like 1m, 2m...)
Thanks,
Ken