Hi, E2E members
Can we connect External EEPROM (EDID) at SDA(14pin) and SCL(15pin)?
EVM user guide says, External EEPROM (EDID) connect DDC_SDA(44pin) and DDC_SCL(45pin).
Regards,
Nao
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi, E2E members
Can we connect External EEPROM (EDID) at SDA(14pin) and SCL(15pin)?
EVM user guide says, External EEPROM (EDID) connect DDC_SDA(44pin) and DDC_SCL(45pin).
Regards,
Nao
Nao,
Connecting the EDID to the SDA and SCL pins are not recommended since the EDID needs to be pulled up to the RX_5V HDMI Detect Input, while the SDA and SCL pins MUST have an external pullup to either 1.8 or 3.3V.
Regards,
Jonny