TPS65988: TPS65990 VBUS RC design

Ann_Lien

Genius 13000 points

Part Number: TPS65988
Other Parts Discussed in Thread: TPS65990, , TVS2200

Hi expert,

Customer wants to know how to design VBUS RC snubber for TPS65990. Would you kindly help on it? Thanks!

Best regards,

Ann Lien

over 6 years ago

0 Adam Mc Gaffin over 6 years ago

TI__Mastermind 29995 points

Hello Ann,

If you look within the TPS65988 datasheet, and go to section "9.2.1.2.4 VBUS Snubber Circuit", this outlines how to implement a snubber circuit on VBUS.

0 Ann_Lien over 6 years ago in reply to Adam Mc Gaffin

TI__Genius 13000 points

Hi Adam,

Thanks for reply! May I know why the combination is 3.48ohm and 4.7uF? Do we have equation for it? Thanks a lot!

Best regards,
Ann Lien

0 Adam Mc Gaffin over 6 years ago in reply to Ann_Lien

TI__Mastermind 29995 points

Hello Ann,

We ran a simulation to come up with the values shown in the datasheet. Why these values are chose is described within the datasheet, highlighted below. We recommend that if the customer wishes to use a snubber circuit, to use the values shown below. If not, than a TVS diode can be used such as the TVS2200.

Hope this answers your question. If so, please click THIS RESOLVED MY ISSUE

Interface

Interface forum

TPS65988: TPS65990 VBUS RC design