• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 177 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPD1S414: Applying power to VBUS_SYS with VBUS_CON floating

Mike Credelle
Intellectual 300 points
Part Number: TPD1S414

I have a board that we will be testing with a pogo pin interface.  The current jig does not allow me to plug in a USB cable to the board and I didn't provide a testpoint between the connector and the TPD1S414 input.  The only place the test jig can apply power is to a TP after the TPD1S414.  Will there be any issues with VBUS_SYS having 5V on it while VBUS_CON is floating?