DS90UB953A-Q1: DS90UB953 POC

Ian Wang

Mastermind 26305 points

Part Number: DS90UB953A-Q1

Hi Sir,

Please kindly advise which one is correct on UB953 POC circuit, thanks.

Fig.1

Fig.2

over 4 years ago

0 Steven(Shenzhen) Shi over 4 years ago

TI__Mastermind 30515 points

Ian,

the figure1 is used for low back channel data rate, such as UB933/ub934/UB964 link, figure2 is designed for higher FC/BC rate such as ub953/954 combo.

for your design, pls check the link FC and BC rate setting (this can be set based on your system design through the reg.), if the BC is over 25Mbps, figure2 is better.

best regards,

Steven

Interface

Interface forum

DS90UB953A-Q1: DS90UB953 POC