• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 32 subscribers
  • Views 497 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB3410: schematic review

daniel
Genius 5095 points
Part Number: TUSB3410

Hi Team,

Please kindly help to review our schematic.

Thanks

  • 0
    Genius 5095 points

    Hi Team,

    We also have some questions, please kindly help.

    1. According to SLLA154 document-"VIDs, PIDs, and Firmware: Design Decisions when Using TI USB Device Controllers"
        What is the difference between Type2 and Type3 EEPROM? Is it Ok we choose 24LC64T?

    2. Could we instill below I2C Firmware in EEPROM directly? Or need to use "TUSB3x10 EEPROM Burner" to generate the file?

    Thanks

  • 0 in reply to daniel
    TI__Guru** 117625 points

    for Schematic, you need pullup for SCL/SDA sugnal.

    for other question:

    1: firmware about 14k, so 24LC64T may good enough, but we prefer 128k EEPROM.

    2: you need "TUSB3x10 EEPROM Burner" to install firmware.