I have a project to support long trace for a USB OTG deivce.I place one TUSB213 near CPU,and the otherone near connector,which level (DC&AC Boost) is better for this case. I must to use the both of HOST and SLAVE mode of the CPU.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I have a project to support long trace for a USB OTG deivce.I place one TUSB213 near CPU,and the otherone near connector,which level (DC&AC Boost) is better for this case. I must to use the both of HOST and SLAVE mode of the CPU.
Hi,
Is there any more support needed for this issue? If so please reply with any relevant details so that I can further assist you. For now I will be marking this thread as "TI Thinks Resolved". If you have resolved your issue, please post the solution to the original problem/post for others with similar issues.