• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 324 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TLIN1441-Q1: Where to connect Thermal Pad?

TLIN1441-Q1: some questions

Chen Melina
Intellectual 945 points
Part Number: TLIN1441-Q1

Hi

1. Can LIMP, nRST and WAKE pins be suspended without use?

2. WDT grounding, how long will the NWDR reset after the feeding stop?

3. Can the PIN/NCS PIN be directly grounded?

4. Is there any application hint for tlin1441-q1?

  • 0
    TI__Guru 65202 points

    Chen,

    Thank you for coming to us with these questions. Can you give any insight as to what kind of application the TLIN1441-Q1 is being used in?

    1. Yes this is okay. They can all be left floating.
    2. Are you referring to the pulse width of the nWDR pin when it's asserted? Minimum 2ms, typical 4ms, maximum 6ms.
    3. Yes it can if the device is meant to be used in PIN mode only.
    4. Yes, if you visit the technical documents section of the TLIN1441-Q1 product page on TI.com, under application notes there are write-ups about the watchdog use, LDO performance, and failsafe mode.

    Please let me know if you have any other questions.

    Regards,

  • 0 in reply to Eric Hackett
    Intellectual 945 points

    Hi Eric

    We use TLIN144150MTRQ1 in HOW(Hand On Wheel) project.

    Can you review the schematic and give us some Suggestions?But I don't want to put my schematic in the E2E.

  • 0 in reply to Chen Melina
    TI__Guru 65202 points

    Chen,

    If you click my username, you'll be able to find my email. You can email the schematic directly to me.

    Regards,

    Eric Hackett