This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software: TI C/C++ Compiler
In Vivado 2018.2, I did Microblazed Design of Ethernet using internal Block RAM
I am facing “Ethernet Link down” problem , please give me the solution.
-----lwIP TCP echo server ------
TCP packets sent to port 6001 will be echoed back
link speed: 100
Ethernet Link down
DHCP Timeout
Configuring default IP of 192.168.1.10
Board IP: 192.168.1.10
Netmask : 255.255.255.0
Gateway : 192.168.1.1
TCP echo server started @ port 7
Hi Rajesh,
Can you provide more information on the "link down"?
Were you previously able to connect or have you never established link? What type of cable are you using, straight or cross?
Thanks,
Cecilia