Other Parts Discussed in Thread: SN75LVCP601,
Hello.
We are currently using SN75LVCP600 SN75LVCP601 and we have a problem with speed during use.
I'm testing using Linux.
At first boot, the recognition was recognized as SATA3.0, but during read/write testing, it was recognized as SATA2.0 and only operates at the speed of SATA2.0
When recognized as SATA3.0, the speed of SATA3.0 normally comes out when the read test is conducted, but if the write test is carried out, the speed of SATA3.0 will be changed to SATA2.0
I tested it by changing the option value of the Re-driver, but it didn't work out, so I leave a message to solve the problem.
Currently, the settings for the Re-driver are set as follows:
SN75LVCP600 = EQ only is set to High, while the rest are open
SN75LVCP601 = EQ, DE, DEW All High
I have attached a block chart below.