• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 234 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS250DF210: Re-timers

Francisco Tamez
Prodigy 60 points

Part Number: DS250DF210

Hi,

Is it possible to connect both inputs to one source (daisy chain) to use the part as a buffer?   I cannot find any documentation explaining how to implement (if this is possible) or explaining why it not is possible.

Thanks

Francisco.  

  • 0
    TI__Mastermind 19235 points

    Hi,

    I don't fully understand this test setup. Can you describe it in more detail?

    • Connections for Rx+ and Rx- on retimer DUT channel
    • Connections for Tx+ and Tx- on the retimer DUT channel
    • Retimer source signal data rate and amplitude settings

    Cordially,

    Rodrigo Natal

    HSSC Applications Engineer