• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 226 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCA9538: Question of RESET PIN

Jimmy Lai
Expert 6845 points
Part Number: PCA9538

Hi team,

Customer has a question about RESET PIN connect to VCC through a pullup resistor.

Their RESET PIN  connect to VCC through a pullup resistor.

When power on, do they need to add a capacitor on the pull-up resistor to delay for the power sequence?

Many Thanks

Jimmy

  • 0
    TI__Guru 66962 points

    Jimmy,

    This is not a requirement. Adding a capacitor can help with filtering any high-frequency noise, but slowing the edge down for power-up is not required for the device to power up correctly. Please let me know if you have any other questions.

    Regards,