Due to the U.S. Thanksgiving holiday, please expect delayed responses during the week of 11/22.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65987D: TPS65987D e-mark can not be identify

Part Number: TPS65987D
Other Parts Discussed in Thread: TIDA-050012, TIDA-050014, TPS65981

Hi ,

I have same issue in TPS65987 ,

When I set 20V 3A profile to 20V 5A. by Source Board(TIDA-050012) with pjt(TIDA-050012 Source Board)

Then using Sink Board(TIDA-050014) to Check Source Profile with "Received Source Capabilities(0X30)",

But the Receive Source Profile still show 20V/3A , Can help me please?

(-----------My Device--------------)

Source Board: TIDA-050012
Sink Board: TIDA-050014
Type C Cable: E-Books

TPS65981_2_6_7_8 Application Customization GUI Version : 6.1.1

Source Board Pjt File:


(1) When I connect other type-c charger witch can provide more than 3A to Sink board, then Check the register "Received Source Capabilities(0X30)", it's profile is correct as Type-C Charger .

(2) Is there any register in TPS65987 that can check E-mark is on or not?