DP83849I: Strap setting at LED's pins in case of pull down and pull up

Hirotaka Matsumoto

Part Number: DP83849I

Hi all

Would you mind if we ask DP83849I?

The customer would like to know strap setting at LED's pins in case of pull down and pull up.
And then, they would like to take these LED's data from each pins.
We assume it as the attachment file.

20200219_DP83849.pdf

Is it correct?

Kind regards,

Hirotaka Matsumoto

over 4 years ago

0 Nikhil Menon over 4 years ago

TI__Genius 11725 points

Hi Hirotaka-san,

I have attached an example of the LED strap connections you may refer to.

Thank you,

Nikhil

0 Hirotaka Matsumoto over 4 years ago in reply to Nikhil Menon

Guru 27525 points

Nikhil san

Thank you so much for your reply.

We would like to take in the each LED pin signal to the CPU with LED using.
What you showed is for only LED using, it doesn't include taking in LED's pin signal to the CPU.

<Condition>
1. Taking in LED's pin signal to the CPU
2. We use each LEDs and strap settings

Kind regards,

Hirotaka Matsumoto

0 Nikhil Menon over 4 years ago in reply to Hirotaka Matsumoto

TI__Genius 11725 points

Hi Hirotaka-san,

You may send the LED signal to the CPU as follows:

Thank you,

Nikhil

Interface

Interface forum

DP83849I: Strap setting at LED's pins in case of pull down and pull up