ISO3088: 4kV Isolated RS485 Transceiver

Kavita Rajaram

Part Number: ISO3088
Other Parts Discussed in Thread: ISOUSB211, ISOUSB111

Hi Everyone,

For a project I'm looking for 4kV Isolated RS485 Transceiver(MPN for reference ISO3088), 10/100 Ethernet Transceiver, & USB transceiver.

Can someone suggest a suitable part?

Thank you.

Kind regards,

Kavita

over 1 year ago

+1 Koteshwar Rao over 1 year ago

TI__Guru 53025 points

Hi Kavita,

Thank you for reaching out.

For an isolated RS-485 transceiver with 4kV isolation withstand voltage, we recommend that you look at ISO14xx family. Please see below the list of all part numbers from this family from the datasheet and the key difference between them. You can choose any of these based on your requirement.

If you are also looking for isolated USB, then we have ISOUSB111 (LS & FS) or ISOUSB211 (LS, FS & HS).

For suggestions on Ethernet transceivers, please post your question on the interface forum so that the team can help you with the best device suggestions. Thanks.

https://e2e.ti.com/support/interface-group/interface/f/interface-forum

Regards,
Koteshwar Rao

0 Kavita Rajaram over 1 year ago in reply to Koteshwar Rao

TI__Prodigy 130 points

Hi Koteshwar,

I will make a different post for the Ethernet transceiver.

Thank you for the help.

Kind Regards,

Kavita

Isolation

Isolation forum

ISO3088: 4kV Isolated RS485 Transceiver