TXS0102: TXS0102 dual supply translating transceriver question

Lawrence He

Expert 2830 points

Part Number: TXS0102
Other Parts Discussed in Thread: TXU0202,

Hi, Support Team

as below schematic is workable?

Sould I OE pin connect to MCU GPIO and pull down to GND?

also i confused about Transceiver and level shift is mean same parts? or different parts?

if any, Please advise me.

Thanks,

Best regards,

Lawrence

0 Clemens Ladisch over 1 year ago

Guru 266830 points

What to do with the OE pins depends on when you want the device to be enabled.

The TXS is not a transceiver; it is a passive switch that works as a level shifter.

The TXS is bidirectional. For two unidirectional signals, the TXU0202 would work better.

0 Jerry Lin over 1 year ago in reply to Clemens Ladisch

Dear Clemens Ladisch

(1) Is TXS0102 a Voltage-Level Translator, and also called level shifter？

(2) Is the schematic workable if we want to enable TXS0102 permanently?

Thanks

+1 Clemens Ladisch over 1 year ago in reply to Jerry Lin

Guru 266830 points

Yes, voltage translator and level shifter have the same meaning.

Tying OE to V_CC (with or without a resistor) is OK.

Logic forum