• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 18 subscribers
  • Views 95 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LVC1G14: Simulation

David Nestler
Prodigy 30 points
Part Number: SN74LVC1G14

I am using this inverter (PN: SN74LVC1G14YZVR) in a design and I would like to simulate it in TINA.  The only simulation models available from TI on the landing page for this component is an IBIS model, an HSPICE model and a behavioral spice model.  However, I can't figure out how to import any of these three into TINA.  No matter which I try I get errors.  Can this be done and if not then is there another simulation model available for this component that can be used in TINA?  I want to perform transient simulations.

Thank you!

  • 0
    TI__Genius 15810 points

    Hi David,

    Use the behavioral spice model. Download the zip and extract the .cir file to wherever you want. In TINA go to Tools -> New Macro Wizard -> From file -> select the SN74LVC1G14.cir file.

    It should work after that.

    Best,

    Malcolm