TXV0106-Q1: Unused Input and output

Shinji Tsuji

Genius 12618 points

Part Number: TXV0106-Q1

Hi team,

Could you please advise how to terminate the unused input and output pin?

Is it OK to just let them OPEN?

regards,

3 months ago

0 Clemens Ladisch 3 months ago

Guru 260570 points

You must not allow any input to float; connect unused ones to VCC or GND.

Unused outputs can be left open.

0 Michael Ikwuyum 3 months ago

TI__Mastermind 25680 points

Hi Shinji,

It is not recommend to float CMOS inputs without internal pull-downs / pull-ups and would recommend connecting all unused pins to ground for optimal operation, thanks.

Best Regards,

Michael.

Logic

Logic forum

TXV0106-Q1: Unused Input and output