Hi
Iam currently driving the 16 to 20 LED's thru this buffer, controlling thru Micro-controller. Microcontroller GPIO pins are connected to below buffer and output of the buffer driving the LED's. the each LED which are using consumes 40mA to 50mA of current.
http://www.ti.com/lit/ds/symlink/sn74lvt16244b.pdf
I would like to know the buffer will drive 64mA per pin? i confused with the datasheet, 64mA of current indicated in the datasheet but if i use all 16 pins, the buffer will drive all LED's? so 64mAx16=1024mA i can assume?.
is it my understanding is correct? please give me your thoughts on this.
Regards
Anil