SN74AHC1G04-Q1 for crystal oscillation circuit

K.Yaita

Other Parts Discussed in Thread: SN74AHC1G04-Q1, SN74HCU04, SN74AHC1GU04

Hi Team,

My customer considers to use SN74AHC1G04-Q1 for crystal oscillation circuit and I was asked the following.
Is this device single stage inverter?
Datasheet(logic diagram) page.1 shows it is single stage inverter but I would like to confirm just in case.

He considered SN74HCU04(single stage inverter) at first, but he would like to use 1 bit inverter and automotive grade is also required for his application.

Your help would be appreciated.

Best Regards,
Yaita / Japan disty

over 9 years ago

0 James Lockridge19 over 9 years ago

TI__Genius 14485 points

Yaita-san,

Thank you for your question. I am searching for the answer right now.

0 James Lockridge19 over 9 years ago

TI__Genius 14485 points

Yaita-san,

By "single stage" your customer is asking for an inverter with an unbuffered output. TI's inverters that end in "U04" have unbuffered outputs. Consider using the SN74AHC1GU04.

0 James Lockridge19 over 9 years ago in reply to James Lockridge19

TI__Genius 14485 points

Yaita-san,

I was also told that any inverter should work regardless if it is single-stage or not. See the application note below.

www.ti.com/.../getliterature.tsp;fileType=pdf

0 K.Yaita over 9 years ago in reply to James Lockridge19

Guru 29710 points

James-san,

Thank you for your support and informing app-note.
I appreciate for your support.

Best Regards,
Yaita

Logic

Logic forum

SN74AHC1G04-Q1 for crystal oscillation circuit