Required I2C timing diagram for TXS02324 DUAL-SUPPLY 2:1 SIM CARD MULTIPLEXER/TRANSLATOR

I am moving this thread to the level shifter forum where the TXS02324 type of devices are supported.

Thank you,
Adam

Hello Lingaraj,\

Have you looked at the TXS02326A data sheet.  It has some timing diagrams and should be similar to your application.

http://www.ti.com/lit/ds/symlink/txs02326a.pdf

-Francis Houde

Hi Francis,

                      Those are looks like BSI / SDN DEBOUNCE AND AUTOMATIC SHUTDOWN SEQUENCE TIMING not the i2c but in TSX02324 there's no BSI & SDN Pins ..

Hello Lingaraj,

If you are looking for a full specification and timing diagram for the I2C then just go ahead and Google it and will pop right up.  We follow the I2C bus specifications but we did not actually write them. 

http://www.nxp.com/documents/user_manual/UM10204.pdf

-Francis Houde 

Hello Lingaraj,

I would like to know what you are trying to do?  Are you trying to develop code to produce the I2C signals to interface with something?  Have you written code and it isn't working with the TXS02324?  If you want, you can contact me and I we can have a phone conference to discuss your specific needs.  TI has a variety of material on I2C and a huge selection of parts to help solve your technical problems. I need to know at what stage you are at with your development.  If you are using one of our micros then I can send you sample code and even if you aren't using our micro, the code should help you develop yours.  I am posts a few links here with additional material about I2C including sample code, guide, etc.  Please let me know if you want additional information and we can setup a phone conference.

http://www.ti.com/lit/ug/spruer0d/spruer0d.pdf

http://www.ti.com/lit/ug/spru721c/spru721c.pdf

http://www.ti.com/lit/an/slaa382a/slaa382a.pdf 

http://focus.ti.com/pdfs/logic/i2cselguide.pdf

Sincerely,

-Francis Houde

Hi Francis Houde,

Thanks for your reply, I have provided Some Schematic in my another thread regarding the same problem

e2e.ti.com/.../466103

with the sub: Problem with I2C Interface in TXS02324 Dual-Supply 2:1 SIM Card Multiplexer/Translator With Slot Dedicated Dual LDO .. Kindly have a look at it & let me know if anything wrong in hardware Connections ....