• State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 19 subscribers
  • Views 851 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

technical inquiry

Goutham Sharma
Intellectual 400 points
Other Parts Discussed in Thread: SN74LVCH16T245-EP

Hi,

What is the maximum acceptable Junction Temperature, Junction-to-Case Thermal Resistance (theta - JC)  and
Junction-to-Ambient Thermal Resistance (theta - JA) for the following devices

1) 74AVCH1T45DCKTG4

2) SN74LVCH16T245-EP

3) SN74LVCH16240ADGGR

  • 0
    TI__Mastermind 26105 points

    Hello Goutham,

    1) The absolute maximum junction temperature for the 74AVCH1T45DCKTG4 is 150°C. For the other specifications on this part please refer below.

    2) For the SN74LVCH16T245-EP part the responsibility belongs to the High Reliability forum. Please post your question regarding this part in this forum : 

    3)For the SN74LVCH16240ADGGR part I have notified the appropriate engineers and they will respond shortly. 

  • 0 in reply to aozer
    TI__Guru 57340 points
    Goutham ,

    Thermal data for the SN74LVCH16240ADGGR device in degC/W .

    Result- Theta JA-High K (standard datasheet value)
    63.1
    Result-Theta JC, top (standard datasheet value)
    20.2
    Result-Theta JB (standard datasheet value)
    30.1
    Result- Psi JT (standard datasheet value)
    2.2
    Result- Psi JB (standard datasheet value)
    29.8
    Result-Theta JC, bottom (standard datasheet value)
    n/a
  • 0 in reply to ShreyasRao
    Intellectual 400 points

    hello Shreyas ,

    Thanks for the response.

    What is the maximum acceptable junction temperature for the devices  SN74LVCH16240ADGGR and SN74LVCH16T245-EP ?

  • 0 in reply to Goutham Sharma
    TI__Guru 57340 points
    Goutham ,

    The max junction temp will be usually mentioned in the abs max ratings table to be 150C for most of the logic devices.