This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CD14538B: Power on reset function

Part Number: CD14538B

Hi,

When VDD is lower 3V(recommended operating voltage), is the "Q" pin kept low or unstable?

If it is unstable, can it be kept low by RESET pin=Low?

Best Regards,

Kuramochi 

  • Outside the recommended operating conditions, there are no guarantees whatsoever, i.e., the Q pin might be unstable, and the RESET pin might not work either.

    To ensure a known state when powering on, the RESET pin must be low when the supply voltage reaches 3 V.