• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 181 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

EK-TM4C129EXL: Peripheral Freeze During Debug

Matthew Constance
Prodigy 80 points
Part Number: EK-TM4C129EXL

Hi,

For the TM4C series in general, is there information on how the peripherals behave when the debugger is stopped in CCS either manually or by a breakpoint? Some appear to continue to run, I’m not sure if they all do? Also, is there a means to change the behaviour, i.e. enable/disable freezing on halt?

Thank you,

Matthew

  • 0
    Prodigy 80 points

    Sorry, I posted this question a second time as the original didn’t show up immediately, yet is showed up 10 minutes or so later. I’ll mark this one as resolved, maybe a moderator can delete it.

    Matthew