TMDS570LS31HDK: STC self test intervals

Robin S

Part Number: TMDS570LS31HDK
Other Parts Discussed in Thread: HALCOGEN

Hi,

In the related question someone had asked if there was a specific reason for the time delay in the STC test setup generated by HALCOGEN.

I need to configure the test to use 24 cycles instead of 1, so I have to put the code in the user code space after the delay. I want to verify if this delay is needed or not?

I was wondering if anyone had any information on this? Thanks.

9 months ago

0 jagadish gundavarapu 8 months ago

TI__Mastermind 39615 points

Hi Robin,

We started working on your issue and will try to provide an update ASAP.

--
Thanks & regards,
Jagadish.

+1 jagadish gundavarapu 8 months ago in reply to jagadish gundavarapu

TI__Mastermind 39615 points

Hi Robin,

Apologies for the delay.

Robin S said:
I need to configure the test to use 24 cycles instead of 1, so I have to put the code in the user code space after the delay. I want to verify if this delay is needed or not?

No, Robin. No delay is required.

Just do the configuration as per the section 8.2.1

Thanks & regards,
Jagadish.

0 Robin S 8 months ago in reply to jagadish gundavarapu

Prodigy 145 points

Thanks Jagadish.

Arm-based microcontrollers

Arm-based microcontrollers forum

TMDS570LS31HDK: STC self test intervals