This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP-MSPM0L1306: (Error -614 @ 0x0) in CCS 20.0.1.4__1.6.1 Windows 11

Part Number: LP-MSPM0L1306

Tool/software:

Hi,

I did a bad manipulation (I presume) and the LP-MSPM0L1306 EVB is not working since this manipulation. I have another on and this second one is working just fine.

Here is the complete error text I get since then with the first EVB I have: 

"Texas Instruments XDS110 USB Debug Probe/CORTEX_M0P Error connecting to the target: (Error -614 @ 0x0) The target indicates there is an error condition from a previous SWD request. Clear the error the condition, and try the SWD request again. (Emulation package 20.0.0.3283)"

I did follow theses instructions here wihtout success: 

https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1238281/mspm0l1303-clearing-fatal-error-failed-to-connect-to-the-xds-emulator-connect-cpu-error--614-0x0-in-iar

https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1205415/mspm0l1304-mspm0l1304-set-core-in-halt

I programmend the XDS110 using the procedure XDS110 Debug probe User's Guide page 19 without success.

Thanks a lot for your help.