LP-AM243: AM2434 Firmware Upgrade Over Ethernet

KAVASKAR S

Part Number: LP-AM243
Other Parts Discussed in Thread: AM2434

Tool/software:

Hii,

I am working with the AM2434 and looking for the best approach to upgrade firmware over Ethernet. Could you provide any reference examples or documentation for this?

Thanks and regards,

Kavaskar

11 days ago

0 Ashwani Goel 10 days ago

TI__Mastermind 25530 points

Hi Kavaskar,

Thanks for your query.

I will check on this and get back to you.

Regards

Ashwani

0 KAVASKAR S 10 days ago in reply to Ashwani Goel

Prodigy 10 points

Thanks for your response. I appreciate it. Looking forward to your update.

0 Ashwani Goel 9 days ago in reply to KAVASKAR S

TI__Mastermind 25530 points

Hi KAVASKAR S ,

We do not have example on AM243x. But you can refer below one and port it as per your usage.

AM263x MCU+ SDK: SBL QSPI ENET

Regards

Ashwani

+1 KAVASKAR S 2 days ago in reply to Ashwani Goel

Prodigy 10 points

Hi Ashwani,

When I try to replicate the examples\drivers\boot\sbl_qspi_enet from AM263x in AM2434, it fails to build.

Additionally, the AM263x includes QSPI, EDMA, and an HSM client, whereas the AM2434 does not.

I have configured the bootloader and flash settings in example.syscfg for AM2434. Could you confirm if this is correct, or am I missing something?

Please guide me on how to proceed with this.

Thanks,
Kavaskar

Arm-based microcontrollers

Arm-based microcontrollers forum

LP-AM243: AM2434 Firmware Upgrade Over Ethernet