Hi,
I've been using the launchpad with IAR Workbench and I really want to use either this MCU or the Tiva version on a project I'm working on so I want to make sure I understand how to program this correctly in circuit before I stick with it.
If I understand it correctly I can program a bare MCU that i buy from digikey or mouser on my own pcb using the JTAG pins from the launchpad. And by removing the jumper on the board I prevent the lower non ICDI chip from intercepting the program instead. Assuming this is correct will I be able to continue dev on IAR with a lm4f120 on my pcb?
This is my reference: http://processors.wiki.ti.com/index.php/Stellaris_LM4F120_LaunchPad_Debug_How_To
Thanks in advance!
