• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 30 subscribers
  • Views 503 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Programming the EK-LM4F120XL off of the stellaris launchpad board

HuskyEngineer
Prodigy 100 points

Hi,

I've been using the launchpad with IAR Workbench and I really want to use either this MCU or the Tiva version on a project I'm working on so I want to make sure I understand how to program this correctly in circuit before I stick with it.

If I understand it correctly I can program a bare MCU that i buy from digikey or mouser on my own pcb using the JTAG pins from the launchpad. And by removing the jumper on the board I prevent the lower non ICDI chip from intercepting the program instead. Assuming this is correct will I be able to continue dev on IAR with a lm4f120 on my pcb?

This is my reference: http://processors.wiki.ti.com/index.php/Stellaris_LM4F120_LaunchPad_Debug_How_To

Thanks in advance!