Tiva C Series TM4C1294 Connected LaunchPad

Jeetesh Kumar Tiwari

Other Parts Discussed in Thread: EK-TM4C1294XL

Hi,

I purchased Ek-TM4c1294XL evaluation board last month. Now i want to do some software development using this board. For this first I used your given example i.e. hello_TivaTM4C1294NCPDT. I compiled this example it is done but when i tried to load on the development board, it is not happening. For this I am attaching snapshot.

Regards

Jeetesh

over 10 years ago

0 Amit Ashara over 10 years ago

TI__Guru**** 244380 points

Hello Jeetesh

Clearly this example is not coming from TivaWare but from TI RTOS. I would ask to run the basic examples from TivaWare first to validate the authenticity of the exercise

Regards
Amit

0 Jeetesh Kumar Tiwari over 10 years ago in reply to Amit Ashara

Intellectual 305 points

Thank You Amit for replying,

This problem is solved. This was happening because of not selecting the Stellaris In-Circuit Debug Interface from properties--> General--> Connection in CCS.

Regards
Jeetesh

0 cb1_mobile over 10 years ago in reply to Jeetesh Kumar Tiwari

Guru 117855 points

Good that - yet the advice which Amit offers, "Always start with basic examples from TivaWare" is so powerful as to deserve restatement!
Adding complication - especially in the beginning - is a well worn path to delay, confusion & frustration...

Arm-based microcontrollers

Arm-based microcontrollers forum

Tiva C Series TM4C1294 Connected LaunchPad