Hello
I have been working with EPROM programing on tm4c123 and something have gone very bad… code composer can´t connect any more with it
Error connecting to the target:Unable to communicate with the device. Please check your connection.
There is a way to get back to zero with it…I mean re-flash it to as it came from factory?
Thanks truly
Daniel
Hello Daniel,
Yes, use our LMFlash Programmer tool found here: http://www.ti.com/tool/LMFLASHPROGRAMMER
With this tool, go to the Other Utilities tab and use the Debug Port Unlock feature for TM4C123 class devices (see below). Follow the prompted instructions closely and it should unlocked. Occasionally you may need to do the process a second time to fully unlock it.
