TMS320F2800157: F2800157

Premkumar T

Hey All,

I am working on the Launchpad F2800157.

I am trying flash the Launchpad via UART and CAN bootloader. I am able to flash via UART using C2Prog Codeskin programmer.

Now, I am trying to flash via Peak System PCAN-USB tool. I am not able flash.

Could you suggest me how to flash the via CAN bootloader.

Thanks,

Premkumar.T

over 2 years ago

0 Opus Fontillas over 2 years ago

TI__Prodigy 370 points

Hello,

The expert is currently out of office, please expect delays.

0 Charles Roberson over 2 years ago

TI__Genius 15080 points

Hi Premkumar.T,

To flash via the CAN Bootloader, you will need an implementation of the MCAN Flash kernel for this device. What are you using as the kernel program to try to flash the device?

Thanks and regards,

Charles

0 Premkumar T over 2 years ago in reply to Charles Roberson

Intellectual 455 points

Hi Charles,

Thank you for your response.

We are flashing via C2Prog Codeskin programmer tool. I am not getting the CAN option in the tool connected the PCAN_USB.

Any help is much appreciated. Thanks in Advance.

Thanks,

Premkumar.T

0 Charles Roberson over 2 years ago in reply to Premkumar T

TI__Genius 15080 points

Hi Premkumar.T,

Per the website (FAQ - C2Prog), "C2Prog only supports TI's SCI/UART boot mode. All other interfaces are based on proprietary bootloaders developed by CodeSkin."

There are examples that exist for the F28003x and F28P65x devices, discussed in the CAN Flash programming application note (ti.com/lit/sprad51).

Thanks,

Charles

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F2800157: F2800157