Tool/software:
we converted 4 wire to 2 wire JTEG and also reduced the TCK frequency also wrapped the wires, but still i am facing the JTEG disconnection issue.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
we converted 4 wire to 2 wire JTEG and also reduced the TCK frequency also wrapped the wires, but still i am facing the JTEG disconnection issue.
Hi,
Not sure about the history on this issue. Is this your custom board ? Have you already referred to this appnote to follow the steps to debug such issues ?
Vivek Singh
Look like this is duplicate of this this issue - https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1371350/tms320f2800157-q1-tms320f2800157-q1-jteg-disconnection-issue
We'll discuss on other post. so this one can be closed.
Vivek Singh